Difference: ItsDaqSoftware (1 vs. 2)

Revision 22017-01-30 - TomErikHaugen

Line: 1 to 1
 
META TOPICPARENT name="DaqDocumentation"

ItsDaq Software

This is the software for the interfacing with the DAQload (the root script Stavelet.cpp).

Added:
>
>
This is an update of the SCTDAQ software from the SCT. It is largely documented on the ATLAS TWIKI. I have included some of the useful pages below.

Useful information about ATLYS, including the firmware that is loaded to the board: ATLYS ITSDAQ

Description of configuration file (st_system_config.dat): ITSDAQ Config Files

Description of GUI interface and different tests: DAQ GUI

General page with these links and more: Strips Upgrade DAQ

 

Tips

  • If you cannot communicate with the DAQload:
    • Check that the configuration files correspond to what you are testing
Line: 16 to 26
 

Comments

Deleted:
<
<
<--/commentPlugin-->
 \ No newline at end of file
Added:
>
>

<--/commentPlugin-->
 \ No newline at end of file

Revision 12016-11-17 - TomErikHaugen

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="DaqDocumentation"

ItsDaq Software

This is the software for the interfacing with the DAQload (the root script Stavelet.cpp).

Tips

  • If you cannot communicate with the DAQload:
    • Check that the configuration files correspond to what you are testing
  • If you can get the HCC address but not the chips ID
    • Change the phase of the signals (through root type e->ConfigureVariable(50,2))
  • The script Stavelet.cpp which opens the GUI crashes very often (usually after running about 2 tests)
    • To gain control again when the GUI stops updating enter e->CacheMasks(1) this clears the cache and allows for communication again

-- Tom-Erik Haugen - 2016-11-17

Comments

<--/commentPlugin-->
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback