Difference: ShippingTmModules (3 vs. 4)

Revision 42017-06-28 - TomErikHaugen

Line: 1 to 1
 
META TOPICPARENT name="ThermoMechanical"

Shipment of TM Modules

Line: 22 to 22
  Suction Pads
Added:
>
>
The spacer has 4 suction pads that push directly onto the sensor to hold it in place. The original part number for these pieces is "FiPA 102.006.013.2/17" however FiPA does not have an American distributer. We selected VacMotion PA06-SIT suction pads.

Using these in the frames showed that they were not tall enough. They were in fact 1mm shorter and therefore did not hold onto the sensor. We cut spacers from tubing and slide them under the suction pads to elevate them above the frame.

<-- Image of spacer --!>

 Plexiglass Covers
Added:
>
>
The plexiglass covers were cut from from ESD safe plexiglass with a waterjet. The drawings are included below:

<!-- Plexiglass Covers -->

 Nuts and Bolts

Accelerometer

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback