Difference: TravelingDaqLoadFullHybrid (1 vs. 2)

Revision 22017-03-16 - TomErikHaugen

Line: 1 to 1

META TOPICPARENT	name="WebHome"

Traveling Full Hybrid DAQload

Line: 6 to 6

This test was run using the older hardware (meaning LVDS Buffer instead of SLVS Buffer Board). The software version was 4775, the firmware was va0fa.

Added:

>
>

The tests were run on March 14th, 2017. Specifically the macro Start_and_Run_ABC130.cpp was run. This tests stability by performing 100 3PG scans. The results are summarized below (this is what was uploaded to the ATLAS TWiki https://twiki.cern.ch/twiki/bin/view/Atlas/TravelingDaqLoad

Innse Unbonded	Innse Bonded	Gain	humidity	Temp
496 (chip 0 stream 0)	601 (chip 7 bonded)	78.6 (stream 0) 78.3 (stream 1)	<10% RH (dry flushed)	25�C

The full results are included on the TWIKI page as daqload_01s_LBNL_2017_03_14.tar.gz

Tom-Erik Haugen - 2017-03-14

Comments

Deleted:

<
<

<--/commentPlugin-->

\ No newline at end of file

Added:

>
>

<--/commentPlugin-->

Revision 12017-03-14 - TomErikHaugen

Line: 1 to 1

Added:

>
>

META TOPICPARENT	name="WebHome"

Traveling Full Hybrid DAQload

The DAQload arrived from Santa Cruz on March 13th 2017. Dry air was connected to the box and tests were run.

This test was run using the older hardware (meaning LVDS Buffer instead of SLVS Buffer Board). The software version was 4775, the firmware was va0fa.

-- Tom-Erik Haugen - 2017-03-14

Comments

<--/commentPlugin-->

View topic | History: r2 < r1 | More topic actions...