Difference: UsingHighVoltage (2 vs. 3)

Revision 32016-10-14 - TomErikHaugen

Line: 1 to 1

Ramping High Voltage

Line: 13 to 13
  1. Set the compliance current to 500nA
    • press the edit button twice
    • the up and down arrows surrounding the "auto-range" button change the scale
    • use the up and down arrows by the V, I, R buttons to adjust the value.
    • use the up and down arrows labeled edit to adjust the value.
  1. Turn on the output.
  2. Change the output voltage in steps of -10 Volts at a time.
    • press the edit button once
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback