Electrical Module Results

First Electrical Module

Assembly

DAQ results below

Module Without Power Board

In order to study the before/after effects, the module was tested before adding the power board. Throughout testing the first module, all of the cables and boards (SLVS, Atlys, etc.) have been replaced by Charilou since the setup for the DAQ loads. (The new HV cables were made by Marcos Turqueti, from engineering.) The software has also been updated, as of __. We had also bought the new Nexys board, which has been set up on the laptop. Maosen also set up the new PC with the newer version of the DAQ software.

The module had gone through various tests, due to long test times (fixed with the DAQ software update) and fixing of the dry air filter in 50B-6238 (during which we temporarily used nitrogen tanks).

Module With Power Board

Article text.

-- Charilou Labitan - 2018-01-17

Comments


Edit | Attach | Watch | Print version | History: r10 | r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r1 - 2018-01-17 - CharilouLabitan
 
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback