ItsDaq Software

This is the software for the interfacing with the DAQload (the root script Stavelet.cpp).

Tips

  • If you cannot communicate with the DAQload:
    • Check that the configuration files correspond to what you are testing
  • If you can get the HCC address but not the chips ID
    • Change the phase of the signals (through root type e->ConfigureVariable(50,2))
  • The script Stavelet.cpp which opens the GUI crashes very often (usually after running about 2 tests)
    • To gain control again when the GUI stops updating enter e->CacheMasks(1) this clears the cache and allows for communication again

-- Tom-Erik Haugen - 2016-11-17

Comments

Edit | Attach | Watch | Print version | History: r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r1 - 2016-11-17 - TomErikHaugen
 
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback