DAQ Hardware List LBNL

This only lists the hardware. The descriptions of these can be found in DaqDocumentation and in LblDaq.

Current DAQ Hardware

Name Status Location Note
Arduino Uno Working Current Chamber currently in use
Atlys Broken cabinet From UK (Peter Phillips)
Atlys Working main table currently in use
Module Adaptor   main table  
Module Power   Current Chamber  
Module Power   Old Chamber  
Panel Adaptor   main table  

Panel Power

Breakout Board

  on panel 1

Difficult to remove

from panel

SHT75 working Current Chamber environmental sensor
SHT75 working Current Chamber environmental sensor
SLVS Buffer Working main table currently in use
VMOD Adaptor   main table currently in use
VMOD-IB   main table currently in use

Old DAQ Hardware

Name Status Location Note
LVDS board working Old Chamber  
LVDS board dissasembled Old Chamber connector was desoldered. can be reconstructed
       
       
       
-- Tom-Erik Haugen - 2017-02-07

Comments


This topic: Strips > WebHome > DaqDocumentation > LBNLHardwareList
Topic revision: r2 - 2017-06-05 - TomErikHaugen
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback