Documentation for Prototypes


These were prototypes to troubleshoot the DAQ system. They featured 1 ABC 130 chip and 1 HCC 130 along with a mini-sensor with 100 channels. They were built in the summer of 2016. There is a right handed and left handed version.

Thermomechanical Prototypes

The thermomechanical modules were produced in 2016-2017 using a mechanical sensor and glass chips. They were practice for assembly along with a test of the electronics and heating for the stave. Ten were produced at LBNL and sent to Brookhaven to be assembled into a full stave.

130 nm Electrical Prototypes

Construction on the first electrical prototype began at the very end of 2016 and through 2017. The hybrids were constructed and tested on the panel before being mounted onto the sensor.

-- Tom-Erik Haugen - 2017-06-26


Edit | Attach | Watch | Print version | History: r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r1 - 2017-06-26 - TomErikHaugen
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback